This blog post will tell you when you need to get your garage door opener repaired. The post will also tell you when to call in the garage repair professionals.
Does Your Garage Door Opener Need to Get Repaired?
Repairing a broken garage door isn’t cheap. Therefore, you will want to make sure that your garage door needs to get fixed before you call in a Las Vegas garage door repair company. You can perform the following tips to assess the situation regarding the state of your garage door and opener.
Checking Your Garage Door and Opener
Before you assume that the opener system does not work, ensure that you don’t have a broken garage door on your hands. Is the door sitting out of alignment? Do you have malfunctioning garage door springs? If you can’t open the door manually, you don’t have a problem with your garage door opener. In this case, you will need to get your door repaired.
If you can open your garage door manually, you will need to look at the actual garage opener. If you see that the lights on the wall are off, you might need to reset the circuit breaker. If your wall lights are turned in the “on” position, unplug your unit and plug it back into the socket. At times, resetting the system can solve your problem. If this doesn’t work, your opener system will need to get fixed.
What You Should Do If You Have a Broken Garage Opener
Some of the most common issues you will encounter are stripped nylon gears and problems with the logic board. Since both of these problems will cost a lot to fix, you might be better off replacing the system. However, under some circumstances, repairing your garage door opener could save you money. Before you start, look at your warranty to learn if the costs of repair are covered. If they’re not, call your local garage door repair company to see how much repairing your opener will cost.
The Final Steps
If you’re experiencing issues with your garage door opener, first check the electricity and make sure that it is “off.” See if you can open your door manually. Examine the opener’s light. Unplug the system and plug it back into the socket. If following these steps doesn’t fix the problem, you will need to either repair your old system or get it replaced.